• " Live" Music Recording
• Band-In-A-Box Recording mixed with a "live" recording
• Variable pitch/tempo playback demonstrations
• Burning CD's with optional playback changes to tempo and pitch

Pre-Set Before any Recording:

• Analog switch is on
• Set Mic switch from line or mic
• Speakers Off
• Phone/speaker Level Off
• Internal mike, or external microphone set
• ALC microphone control off
• Mic line set up full power
• Set Phone Selector to Line Out for just about all applications
• Hit the stop button in the CDW module to activate that module.
• Hit red Record button.
• Hit the Rec Mode button on left top panel
• Turn flywheel to obtain Record
• Push wheel to activate that recording mode.
• Push the "Rec" Key on the CDW panel to start recording.
• When done recording, hit the "Stop" button. Then hit "Finalize" button.

To Mix for Band-In-A-Box Applications and "Live" Soloists(s)

To set Mic/One Stereo to Mix so both microphone and AUX imput from notebook are both in stereo.

• Set the Phone Selector to "AUX."
• Need to get two stereo Y adapter to plug in two headphones or go out the Line Out to a mixer and plug in the second headset on monitor recording.
• Be sure to adjust the Line Out volume knob for correct headphone volume.

To Do a "Live" Group recording and Burn CD's ASAP

• Set recording mode on the fly wheel to 2X copy and Finalize when recording the original group and ready for a fast duplication of a backup CD.

To Duplicate a CD

Necessary Steps:

• Put original CD in playback tray
• Put blank CD in CDW tray
• Set recording mode on fly wheel to 2X copy with Finalization.
• It takes 5 minutes to duplicate a 10 minute CD and 2:10 minutes to finalize it.

Variable Speed/Pitch Demonstration

Necessary Steps:

• Put CD to be demonstrated in Playback tray
• Find the track that you want to demonstrate by moving the fly wheel to that track.
• Select playback button to play it.
• Keep your finger on the key (b or #) and tempo (- or +)
• Hit the A-B Looping button to begin the actual loop
• Hit the A-B looping button again to finalize the end of the actual loop.
• Hit the playback button and it will be repeated forever.
• To cancel Looping, hit the Repeat button.
• Instrumental part might handle a 33% reduction without excessive distortion, but a piano may only handle 25%

To Burn a CD from the Original with Pitch and/or Tempo Changes

Necessary Steps:

• Find the Track on the Original recording with the fly wheel
• Then Hit the Program button and find that track with the flywheel . Hit it twice. The first time to initiate the track as the
• Designated one to be recorded and then a second time to exit the Program selecting Mode.
• Go to the recording mode as already described:
• Hit red Record button.
• Hit the Rec Mode button on left top panel
• Turn wheel to obtain Record
• Push wheel to activate that recording mode.
• Push the Rec Key on the CDW panel to start recording.
• When selecting the Recording MODE on the flywheel, select 2X COPY and Finalize so everything gets done immediately.